- 14 -
3.4 Reset the Lock
Please note all data will be erased if you reset U-Bolt WiFi to
factory default. If you are using U-tec App as Owner, please click
“Delete and Reset” to remove the lock from your U-tec Account,
then use a Reset Needle to push the Reset Button (at the bottom
of Interior Assembly) for around 3 seconds until you hear one long
beep and two short beeps.
3.5 Replace Batteries
Please use 4 high-quality alkaline AA batteries for replacement
when the battery is dead.
3.6 Emergency Key Override
Emergency Key Override can be used when the battery is dead.
1:
2:
3:
1 2 3 4 5 6
X X X X X X
1 2 3 4 5 6
X X X X X X
1 2 3 4 5 6
X X X
X X X
Example
User Code: 123456
Vague Code
3.7 Enable Or Disable Auto Lock
Enable
Please keep Bolt unlocked and press "1" button for 3 seconds until
LED turns green and "1" button blinks.
Disable
Please keep Bolt unlocked and press "0" button for 3 seconds
until LED turns green and "0" button blinks.
This can also be set in U-tec App and Auto Lock timing can be
programmed between 10 seconds to 5 minutes. Factory Default
timing is 30 seconds.
3.8 Anti-peep Keypad
The lock supports up to 16-digit Vague Code. Just enter any
16-digit code, as long as a correct code is included in what you
entered, you can open the door.
Important Note
Please keep at least one key in secure location outside of
your place.
