background image

Initial Installation of the ampli er.

We recommend the following presets when you turn on your ampli er for the  rst time.

        

        Select the load impedance with the 

switch according to the impedance

IMPEDANCE 

         

y

our guitar cabinet.

        Set the 

 control on the rear panel to  .

MASTER VOLUME

5

         Select channel  using the 

channel selector (front panel).

HB-B-CL 

         Set the 

 channel controls to approximately the following values:

"overdrive"

PRESENCE - 5
BASS - 10
MID - 5
TREBLE - 5
MASTER - 5
GAIN - 5

Switch the toggle switches:

SAT - down
FAT - down
JTM - left

POWER 

Turn on the ampli er - a big switch 

- down. 

After warming tubes(5-15 minutes), turn the big switch 

 - down.

STANDBY

Adjust the 

 control to a comfortable volume. 

MASTER

control on the rear panel, you can adjust the output volume up to maximum.

MASTER VOLUME 

Note

:

When working on stage and in the studio, it is recommended to set the MASTER VOLUME to the maximum value,
and adjust the volume with the MASTER knob (for overdrive channels), and the VOLUME knob (for the CLEAN channel)
on the front of the ampli er.

This completes the presetting of channel  .

B

You can now proceed to presetting the 

channel.

HB 

To do this, switch the 

 toggle switch to  .

HB-B-CL

HB

This turns on an additional tube ampli cation stage, and you will hear how your the stallion got spurs in his sides! 
With the 

and 

 controls, either chill the mustang's ardor, or give the wild creature more heat!

GAIN 

MASTER

After such a wild trip, it's a good idea to wipe off the sweat and relax.
        Switch the ampli er to the CLEAN channel - toggle switch 

to   position.

HB-B-CL  CL

         Set the CLEAN channel controls (on the right side of the panel) to the following positions:
         

GAIN - 7

         VOLUME - 5
         BASS - 5
         TREBLE - 5

         Use the 

toggle switch and 

 knob to add brightness and clarity to your sound.

BRIGHT 

PRESENCE

The OP-50 works great with a variety of effects pedals. In particular, a very good result can be obtained with different 
Overdrive / Distortion pedals when using the CLEAN channel. In this case, the GAIN knob of this channel is very effective.

Note

:

-2-

Summary of Contents for OP 50







Reviews: