PRODUCT INFORMATION
7
Surface Prep
Division
P: 877-817- 6687 F: 813-621-7125
Visit us at www.ussaws.com
6. PREPARATION
STEP 1
WHEEL MOUNTING
As shown in FIG 1,
2 x wheels with brake at th back
2 x wheels with no brake at the front
Use locking nuts to mount and fix the wheels
STEP 2
FIX THE MIXING STATION as shown in FIG 2,
Press down the pedal of the universal wheel to lock the wheels.
STEP 4
As shown in figure IV
1. Take out the inner hexagon screw from the mixer,
2. Assemble the mixer to the junction plate in order of 1~4 as shown
in the diagram and tighten by the socket hexagon wrench.( 1-φspring
washing, 2-φfalt washing, 3-junction plate, 4-2mm washer).
3. Put back the junction plate with mixer to the station, tighten the
knob.
4. Install the paddle to the mixer, use the open-end wrench to lock the
mixing paddle and the mixer in the direction shown
STEP 3
1. Disassemble the junction plate firstly,
2. Disassemble the dust over by the socket head wrench,
3. Take outer the mixer carton from the barrel.
STEP 5
As shown in figure V
1. Put back the dust cover as the figure shows, tighten the screws by the
socket head wrench.
2. Connect the dust hole of the mixing station with the dust suction tube
of the external vacuum cleaner in the direction of the arrow.