U.S. Products KING COBRA 500-ADAF Information & Operating Instructions Download Page 3

Serial Number: __________________  
Model: KC-500-ADAF
Purchase Date:
_____________      

 

 

Write the name and phone number of your distributor:  
_____________________________________

_____________________________________

(and be sure to register your purchase to activate your warranty)

RECORD THIS IMPORTANT INFORMATION, AND SAVE THESE INSTRUCTIONS

INSPECTION:

Carefully unpack and inspect your KC-500-ADAF for shipping damage. Each machine is tested and inspected 
before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier 
immediately if you notice damage to the box, the machine, or its parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very thoroughly 
they could cause a build-up in the pump, lines, and quick disconnects. Any problem caused by a chemical is 
not covered by warranty. Use a neutral cleaner with a pH between 5 and 10 to avoid premature wear of the 
pump, seals, and/or other components. It is a good idea to test an inconspicuous area of the fl oor.

MAINTENANCE:

For optimum performance fl ush the machine with clear water at the end of each working day. Once a month, 
minimum, run a fl ushing compound through the machine to break up any mineral or chemical build-up that 
may have formed. The vacuum motor and the pump do not require any scheduled maintenance; however, 
the motor may require replacement brushes after 1000 - 1500 hours. Clean the body with an all-purpose 
detergent, and protect it with an automobile interior polish. Lubricate the wheels, castors, and quick discon-
nects with an all purpose silicone spray.

PARTS AND SERVICE:

Repairs, when required, should be performed by your authorized distributor who maintains an inventory of 
original replacement parts and accessories. Call the distributor from whom you purchased this machine if you 
need parts or service.  Be sure to specify the machine model.  Have your serial number handy.

 

 

DANGER

:  DO NOT USE SOLVENTS, OR ANY CHEMICALS THAT MAY BE 

 

FLAMMABLE, EXPLOSIVE OR COMBUSTIBLE.

3

Summary of Contents for KING COBRA 500-ADAF











Reviews: