INSPECTION:
Carefully unpack and inspect your KING COBRA-1200 PRO 240V for shipping damage. Each machine is tested
and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should
notify the carrier immediately if you notice damage to the box or to the machine or parts.
CLEANING SOLUTIONS:
Select a proper pre-spray for the surface to be cleaned, and apply the pre-spray. Use a neutral pH rinse or
detergent (6 to 9 pH) in the King Cobra to prevent premature wear of the pump, seals and other
components. Damage caused by the use of improper or strong chemicals is not covered by warranty. When
cleaning carpets with the 500 psi pump, we recommend our Magic Fabric Cleaner. Powders are not
recommended.
MAINTENANCE:
For optimum performance, flush the machine with clear water at the end of each working day. Once a
month, minimum, run a flushing compound through the machine to break up any mineral or chemical build-up
that may have formed.
U.S. Products “X-1500” is recommended. The vacuum motor, pump motor, and the pump do not require any
scheduled maintenance; however, the motors may require replacement brushes after 1000 - 1500 hours, and
the 1200 psi pump and unloader valve may require rebuild kits after 500 -1000 hours (refer to machine part
list for numbers). Clean the body with an all purpose detergent, and protect it with an automobile interior
polish. Lubricate the wheels, castors, and quick disconnects with an all purpose silicone spray.
Hoses
Vacuum
Hose
Connection
Auto-fill
Basket
Wheel
Dump Hose
Castor
Switches
Auto-Dump
Pump
Power
Cord
Recepticle
Power Prime
Pedal
Base
Compartment
Vac
Tank
Latch
Chemical
Pick-up hose
Solultion
Tank
1200 PSI
Quick
Disconnect
100 psi
Quick Disconnect
3
Summary of Contents for KING COBRA-1200 PRO 240V
Page 9: ...9 240V...
