background image

FORM NO. 56041894 - 3

Serial Number: __________________    Model: COBRA-H

Purchase Date:_________________
Write the name and phone number of your distributor:
_____________________________________
_____________________________________

RECORD AND KEEP THE FOLLOWING INFORMATION

And don’t forget to register your puchase to activate your warranty

INSPECTION:

Carefully unpack and inspect your COBRA-H for shipping damage.  Each machine is tested and inspected
before shipping.  Any shipping damage incurred is the responsibility of the carrier.  You should notify the
carrier immediately if you notice damage to the box or to the machine or parts.

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless mixed very
thoroughly they could cause a build-up in the pump, lines, and/or quick disconnects.  Any problem
caused by a chemical build-up is not covered by warranty.  Use a neutral cleaner with a pH between 5
and 10 to avoid premature wear of the pump, seals, and/or other components.  Damage caused by the
use of strong chemicals is not covered by the warranty.

MAINTENANCE:

For optimum performance flush the machine with clear water at the end of each working day.  Once a
month, minimum, run a flushing compound  through the machine to break up any mineral or chemical
build-up that may have formed.   Lubricate the wheels, castors, and quick disconnects with an all
purpose silicone spray.  The vacuum and the pump do not require any maintenance; however the
vacuum motors may require new brushes after 1000 - 1500 hours.  Clean the body with an all purpose
detergent, and protect it with a common auto interior protectant.

PARTS AND SERVICE:

Repairs, when required, should be performed by your authorized distributor who maintains an inventory
of original replacement parts and accessories.  Call the distributor from whom you purchased this
machine if you need parts or service.  Be sure to specify the machine model. Have your serial number
handy.

DANGER:  

DO NOT USE SOLVENTS OR ANY CHEMICALS THAT

MAY BE FLAMMABLE, EXPLOSIVE, OR COMBUSTIBLE

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for COBRA-H









Reviews: