208-772-0573 • 800-257-7982 • FAX: 208-772-0577
Coeur d’Alene, Idaho
VISIT US AT: http://www.usproducts.com
SPECIFICATIONS:
Rotomolded Body:
Vacuum:
VAC Shutoff:
Pump:
Waterlift:
Heat:
Heater:
Wand:
Weight:
Dimensions:
Lifetime Warranty
One, 3-stage, 7.2”
Ball float
Positive displacement, 300 psi carpet, 75 psi upholstery
140”
212º F
2000 Watts
Stainless steel, double bend, twin tip
99 lbs.
26.5H x 18W x 28.75L (inches)
TROUBLE SHOOTING:
IF THIS OCCURS
CHECK THIS
NO SPRAY
PUMP DOEN’T RUN
Solution tank is empty.
Clogged spray tip.
Pump not running.
Valve on wand not operating.
No power to pump. Test the switch.
Test the motor directly to AC power.
Debris plugging cleaning tool or vacuum hose.
Drain gate is not completely closed, or seals are damaged.
Vacuum lid is not closed tight.
No power to motor. Test the switch. Test the vacuum motor.
Spraying too long. Try spraying for 12-15 seconds per cycle. Heat exchanger
needs to be flushed.
Wrong tool being used.
Too much water passing through, (longer hose, larger diameter hose, or larger
spray tip), than standard.
Heat is not turned on. Either the green light must be on or the bypass switch
must be turned on.
No power in the wall outlet - check to see if the breaker has tripped.
No power to the bypass switch - check power cord for ‘opens’. No power out of
bypass switch, follow troubleshooting steps to isolate the problem.
Call your distributor for additional help.
LOW SUCTION
NO SUCTION
LOW HEAT
NO HEAT