Page 4
SKU 95575
For technical questions, please call 1-800-444-3353.
1.
Maintain labels and nameplates on this product.
These carry important information.
If unreadable or missing, contact Harbor Freight Tools® for a replacement.
2.
Always maintain a firm grip on the tool with both hands.
3.
Keep the outer body of Grease Gun dry, clean, and free from oil and grease.
4.
Industrial applications must follow OSHA requirements.
5.
Make sure to read and understand all instructions and safety precautions
as outlined in the manufacturer’s manual for the vehicle (or object) you are
lubricating.
6.
This Grease Gun is designed only to hold and dispense grease.
Never use
the Grease Gun to hold and dispense any other material.
7.
WARNING!
The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
REPLACING THE GREASE CARTRIDGE
1.
Unscrew and remove the Extended Pipe (14) from the Head (11).
(See Fig. 1)
2.
Pull the T-Grip Handle (1) all the way back and lock it in place.
(See Fig. 2)
3.
Unscrew the Barrel (3) from the Head (11). Remove the cap from both ends of the 3
ounce grease cartridge.
Note:
Open and prepare cartridge per the manufacturer’s
instructions. Insert the cartridge into the Head (11).
4.
Slide the Barrel over the cartridge and back into the Head.
(See Fig. 3)
5.
Depress the Clamp (2) and push T-Grip Handle (1) forward as far as it will go.
Figure 1
Figure 2
Figure 3
Extended Pipe (14)
T-Grip Handle (1)
Head (11)
Barrel (3)
Clamp (2)
Barrel (3)
SPECIFIC SAFETY RULES
INSTALLING AND REPLACING THE GREASE CARTRIDGE
