SKU 92699
For technical questions, please call 1-800-444-3353
Page 2
Specifications
Item
Description
Function
Indicates if fuel pump is defective or
inconsistent in pressure flow
Pressure Gauge
2-9/16”; 0~100 PSI, 0.7 Bar; Fitting:
¼”x18 NPT swivel
Fuel Injection Types
For most fuel injection systems except:
Bosch
, C.I.S. Jethronic
, and throttle
body systems on G.M.
vehicles.
Weight
1 lb.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lighted.
3.
Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
7.
Use eye and ear protection. Always wear ANSI approved impact safety
goggles.
8.
Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
Note: Accuracy of the Gauge is ± 2%.
REV 05/05
