SKU 90564
Page 5
Charging the Battery with the Power Adapter (19)
1.
Insert the Power Adapter (19) module plug into the Inflator/Deflator unit
connector labeled “DC 9.6V.”
2.
Press the Switch (9) to the Auto position.
3.
Plug the Power Adapter module into an electrical outlet.
Charge the new battery for 8 to 12 hours. Battery usage time will ramp up as
the new Battery is used, and recharged. Do not overcharge the battery.
Caution:
Never leave the Inflator / Deflator unattended while the battery is
being charged. Only charge the battery in a well ventilated area that is free of
flammable materials.
4.
Remove the Power Adapter from the electrical outlet and store in the factory
box.
Charging the Battery with the Vehicle Power Supply Cord (18)
1.
Insert one end of the Vehicle Power Supply Cord (18) into Inflator/Deflator Unit
connector labeled “DC 12V.”
2.
Press the Switch (9) to the Auto position.
3.
Plug the other end of the cord (cigarette lighter adapter) into the vehicle’s 12
VDC power connector.
Charge the new battery for 8 to 12 hours. Battery usage time will ramp up as
the new Battery is used, and recharged. Do not overcharge the battery.
4.
Remove the Vehicle Power Supply Cord from the vehicle’s 12 VDC power
connector, then from the Inflator/Deflator unit, and store in the factory box.
Operation
1.
With the battery fully charged, press the Switch (9) to the “BATT” position.
The Inflator/Deflator will blow air out its air output hole, and suck air into its air
intake hole.
2.
For blowing up items such as air mattresses or rubber rafts, it may be
necessary to use one of the Output Adapters (19) on the air output hole.
3.
For deflating items, place an Output Adapter on the air inlet hole and insert it
into the air mattress air hole.
4.
When finished using the Inflator/Deflator, press the Switch to the “Auto”
position, and immediately recharge the battery as described above.
90564.p65
9/17/03, 1:15 PM
5
