SKU 67418 For technical questions please call 1-800-444-3353.
Page 4
insTruCTions for
mounTinG iTem 67418 56” Top
ChesT
Figure 1
1. Place the top chest onto the bottom
chest as shown in Figure 1.
warninG: make sure the casters on the
bottom cabinet are locked before at-
tempting this. The top cabinet weighs
275 lb. it may take several very strong
people to lift and place the top cabi-
net onto the bottom cabinet. be very
careful not to crush fingers and hands
while performing this task.
Figure 2
2. Next remove the top drawer (11) of the
bottom cabinet as shown in Figure 2.
Figure 3
3. There are two slide rail locks on each
side of the drawer (11) that keep the
drawer from coming all the way out. On
the right side of the drawer, press down
on both of them at the same time while
pulling the drawer straight out. On the
left side of the drawer (11) lift up on the 2
rail locks to disengage them.
See Figure 3.
After the drawer (11) is removed as
4.
shown in Figure 2, you are ready to
fasten the two cabinets together. Use
the four 1-1/2” l, 8mm x 1.25 STD
thread bolts (39). The bottom cabinet
has four holes on the top of it that match
up with holes and welded-in nuts in the
top cabinet (SKU 67418). each hole is
3 inches in from the front and back and
8 1/2” in from the sides. Thread the 4
bolts up into the top cabinet to secure
both cabinets together, then replace the
bottom cabinet top shelf (11).
See Figure 4.
Figure 4
Bolts