Page 4
For technical questions, please call 1-888-866-5797.
Item 64033
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note:
Finger tighten hardware until
assembly is complete.
1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cart.
2. Attach two Fixed Casters (10) to one side
of the Bottom Shelf (8), using eight sets of
Bolts (11), Washers (12) and Nuts (13).
3. Attach two Locking Swivel Casters (9) to the other
side, using eight sets of Bolts (11), Washers (12) and
Nuts (13).
Fixed
Caster
Locking
Swivel Caster
Bottom
Shelf
Nut
Washer
Bolt
Figure A
4. Attach Posts (18) to the outside corners of the Bottom
Shelf, using sixteen sets of Bolts (14) and Nuts (15).
Note:
Make sure the bolt holes on the upper ends
of Posts measure 1-3/8" from the top and the
lower holes measure 1" from the bottom ends.
Bolt
Nut
Post
1"
1-3/8"
Figure B
5. Attach Front/Back Cross Supports (6) to the inside
of Posts using four sets of Bolts (14) and Nuts (15).
6. On the same side as Swivel Casters, attach
Tray (16) to the outside, and a Side Cross
Support (7) to the inside of Posts using two
sets of Long Bolts (11) and Nuts (15).
7. On the other side, attach the remaining Side
Cross Support to the inside of Posts using
two sets of Bolts (14) and Nuts (15).
Bolt
Front
Cross
Support
Back
Cross
Support
Tray
Side
Cross
Support
Side
Cross
Support
Nut
Figure C
WARNING!
The chest is heavy; do not attempt to lift
and lower onto Cross Supports without assistance.
8. With assistance, lift up the chest, then lower
it carefully between the Posts until its bottom
edges rest on the Cross Supports.
Chest
Figure D
