SKU 40732
Page 4
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure that all the parts are included. Refer to the
Parts List and Assembly Drawing at the end of this manual. If any parts are miss-
ing or broken, please call Harbor Freight Tools at the number on the cover of this
manual.
Operation
ThIS TOOL WAS DESIGNED fOR USE ON ThE fOLLOWING vEhICLES:
BMW, vW, GM, AUDI, fORD, hONDA, SUBARU, MAzDA, NISSAN, MITSUBI-
ShI, TOYOTA, AND ROvER. fOR DETAILED INSTRUCTIONS ON USE Of ThIS
TOOL ON YOUR vEhICLE, REfER TO ThE vEhICLE MANUfACTURER’S
MAINTENANCE MANUAL.
1. Jack up the vehicle and secure in place using axle stands.
2. Remove the wheel.
3. Remove the brake caliper from the vehicle mount and slide it off the brake
rotor.
Piston
Caliper (1-9)
Thrust Bolt
Assembly (11)
Plate (10)
T-handle
