U.S. Converters XetaServer XS1200, Setup Manual

Page: 28 / 29

www.USconverters.com
Copyrights © U.S. Converters LLC
28
Use the commands “help” or “sethelp” to get an overview of the parameters. Please refer to the full
command list for all available commands.
Known issues
Problem:
Configuration utility shows this error when exiting:
Cause:
If the configuration utility was not started with Administrator rights this error will show up when closing the
software.
Solution:
Always start the configuration software with Administrator rights.
Problem:
You are getting one or both of the following errors when trying to add a virtual COM port in the AXR2E
software: