31
Step6 Eject the Used Test Strip
After finishing the measurement, you can either
take out the used strip by simply pushing up the
Strip-Ejection button or remove the test strip
directly by your hand. The meter will return to
Main Control Mode and turn off automatically
without any action in two minutes.
Step7 Remove the Lancet
Always use caution when removing the
lancet.
Safely dispose of the used lancet by placing the
protective disk on a hard surface, and pushing
the exposed tip into the disk.
Remove the lancet by pulling the cap off first.
Then slide the ejector forward to remove the used
lancet.
WARNING!
The used lancet and the used test strip are potentially biohazardous.
Please discard them carefully according to your local regulations.
