U-Reach Super1 Series User Manual Download | Manualshive

Page: 15 / 20

background image

13

❶System and Files

Copies data and skips empty space. Only supports standardized formats.

Scroll to select "System and Files”, then press "OK" to save the copy method.

Allows user to copy source device’s System and Files, instead of the entire
device. The system will analyze the source device and identify the data area to
copy. If the source device’s data is within the target device’s capacity, the copy
will be processed. FAT16/32/exFAT, NTFS, EXT2/EXT3/EXT4, and HFS/HFS+/HFSX
are supported in this copy mode.

❷All Partitions

Copies all partitions and data, unallocated partitions not included.

Scroll to select "All Partitions”, then press "OK" to save the copy method.

The target device’s capacity must be equal to or larger than the source device’s
capacity.

Only 120G data area will be copied.

Source

Duplication

Target

500GB

150GB

Unallocated

Partition

Partition1 (150GB)

Data 30 GB

Partition2 (200GB)

Data 90GB

«
...
13
14
15
16
17
...
»

Summary of Contents for Super1 Series





















Reviews:

No comments

Related manuals for Super1 Series

Brand: StarTech.com Pages: 2

Daisy Chain Series

Brand: Reflex7 Pages: 22

Brand: MSC Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands