4
Function Overview
26
Note:
❶
This function supports asynchronous operation, you can continuously plug in and pull out flash media
without pushing any buttons.
❷
The function may change the content of data and format of flash.
❸
To protect source data, the system will not do Capacity Check on the master device.
❹
When the Red light illuminates (Error), you can use
▲▼
to check the error information.
4.4.4 Quick Erase
This function will erase flash’s data, and it will keep the format if the original format of flash
is FAT16/32. User can use
▲ ▼
button to check each flash media’s erasing status, progress
and information.
Note:
❶
Quick erase function can only erase the flash which is FAT 16/32 format.
❷
It will damage the data in flash, please make sure you have backup all important data before using this
function.
❸
If user pulls out the flash card during erase process, the system will stop immediately and red light will on
accordingly to notice user this erase function failed. And, we strongly suggest user avoid this action because
it will damage flash card easily.
4.4.5 Full Erase
It will completely erase the whole flash media, including format and content. Therefore
full erase will take more time. During the process, you can use "ESC" to stop the erasing
process, but the original format and content can’t be read any more.
Note:
❶
It will damage the data in flash, please make sure you have backup all important data before using this function.
❷
If user pulls out the flash card during erase process, the system will stop immediately and red light will on accordingly
to notice user this erase function failed. And, we strongly suggest user avoid this action because it will damage flash
card easily.
