Chapter
➁
- Function Introduction
21
Tatget HDD 500GB
Only percentage range from25% to 32% will be copied.
Source HDD 500GB
Data:250GB
Partition:250GB
500GB
25%
32%
25%
32%
6.2 Skip Error
This function sets the volume of errors that is acceptable for you to skip
during the copy process.
[Skip Error]
0
Note
• If it’s critical that there are no errors on the HDD, then the error counter
should be set to 0.
6.3 Language
Select preferred language.
6.4 Advanced Setup
6.4.1 Unknown Format
This function is used to select if copying the areas with unknown format.
6.4.1.1 Copy Unknown
The setting copies all the unknown area even if the format is not identified.
