11
Sequentially automates from Function 1, Copy to Function 2, then Compare.
Scroll to select "Copy+Compare", then press "OK" to start the automated duplication and
verification process.
4. Erase
Step 1: Connect device(s) for sanitizing.
Step 2: Enter function "Erase"
Scroll to select "Erase”, then press "OK" to view the erase modes.
Step 3: Select an Erase Function.
Here are a couple tips to see port details during erase:
⚫
Press “
▲
” or “
▼
” to view real-time status of each port.
⚫
Press “OK” to view the details of each port.
Step 4: Erase Completed
Caution
⚫
Please back up all important data before using this function.
⚫
User is responsible for verification of targets’ quality. Testing a few
completed targets in a mass production environment for quality control
is recommended.
4.1 Quick Erase
This function will erase the index table from the connected device(s).
Scroll to select "Quick Erase”, then press "OK" to start the erasing process.
4.2 Full Erase
This function will erase all data per NIST 800-88 Standards on the connected device(s).
Scroll to select "Full Erase”, then press "OK" to start the erasing process.
4.3 DoD Erase
This function will erase all data per DoD 5220.22-M Standards on the connected device(s).
Scroll to select "DoD Erase", then press "OK" to start the erasing process.
4.4 DoD EraseComp
Note
Source Port is disabled for erasing. Go to “Erase Master” to enable source port
erasing.
Note
Press “ESC” for 5 seconds to stop all the erase jobs.
