background image

 

 

http://u-prox.com 

Brief description of the panel 

U-Prox IP100  control panel - a device designed to control access to residential and 
business  premises,  for  pass  time  and  events  logging  and  analysis,  including 
personnel time attendance.  

The  defalt  modification  panel  has  built-in  proximity  card  reader  (ASK  and  FSK  RF 
IDs) and keyboard.  

The MF modification panel has built-

in card reader ISO14443A  (Mifare® Standard, 

Mifare® Hi-Memory, Mifare® Ultralight) and keyboard.  

U-Prox  IP100    processes  the  information  received  from  the  reader  (readers),  and 
controls actuator (e.g. a lock) with the built-in relay. 

Panel has two End-of-line supervised inputs. 

The  panel  can  work  offline  or  as  part  of  the  network.  To  add  it  to  Access  Control 
network,  Ethernet  (wired  computer  network)  or  Wi-Fi  (wireless  computer  network) 
interfaces are used.  

The network settings of the control panel are programmed via a standard USB port 
(mini USB B).  

Panel  U-Prox  IP100    has  advanced  hardware  capabilities  and  intellectual  functions 
to  control  a  single  door  with  one  built-in  reader  (single-sided  door)  or  two  readers 
(double-sided door). Having a large amount of non-volatile memory U-Prox IP100  is 
an access control system that provides for access control in variable establishments 
in  small  offices  as  well  as  on  large  enterprises  with  number  of  employees  up  to 
31768 and up to 1,000 visitors. 

Thoroughly elaborated technical and design solutions, the ability to connect external 
reader,  communication  over  a  computer  Ethernet  network  or  wireless  Wi-Fi,  non-
volatile  memory  and  the  clock, protecting  the  communication  ports  and  port  reader 
for short circuit, over-voltage and reverse polarity - all allows to use the panel to build 
a variety of Access Control Systems (ACS) - from the system for a small office to the 
entrance of a large enterprise. 

 

Intended use 

Panel  U-Prox  IP100    is  designed  for  operation  in  access  control  systems  (ACS)  of 
diverse scale in small offices as well as on large  enterprises. Panels are connected 
in ACS via computer network Ethernet or wireless Wi-Fi. 

The  panel  provides  access  to  one  room  with  the  ability  to  control  entry  and  exit  as 
well  as  an  alarm  system  of  rooms  connected  with  this  access point.  In  the  case  of 
simultaneous  control  of  entry  and  exit  from  the  rooms  function  "  Antipassback"  is 
provided (prohibition of re-runs). 

 

Summary of Contents for IP100































Reviews: