OPERATION INSTRUCTION
I. POWER MODE:
1. START MODE: After power connected, the beeper will have a long voice and display will
show full-screen (as figure 1) and system will enter user selecting and setting windows
after 2 seconds (as figure2).
2. DORMANCY MODE: When without any operation or no RPM signal input after 4 minutes,
computer will enter dormancy mode. At this time start stepping or press any key can wake
up the computer.
II. USER SETTING:
Under preset condition, press▲ or ▼ key can select and set USER
:"U0","U1","U2","U3","U4".
1. Press
ENTER
key to confirm the selected user and enter SEX setting: the right information
blank will flash and show "SEX", press▲ or ▼ key to select
male or female;
2. Press
ENTER
key to confirm the selected sex, then enter AGE setting: the right information
blank will flash and show "AGE", press▲ or ▼ key can set ag
e;
3. Press
ENTER
key to confirm the set age and enter H.t setting: the right information blank
will flash and show "H.t", press▲ or ▼ key can set H.t;
4. Press
ENTER
key to confirm the set H.t, then enter W.t setting: the right information blank
will flash and show "W.t", press▲ or ▼ key can set W.t;
5. Press
ENTER
key to confirm the set W.t and enter fitness program mode selecting windows.
30
FIGURE - 1
FIGURE - 2
SEX AGE H.t. W.t.
