U.N.O Fitness LTX6 PRO, Manual

Page: 17 / 27

15
2011/5/16 Ver1.2+V1.0
** If it has any error signal, please connect with the sale agent.
◆ E6 / E7
Incline Function Abnormity Simple Exclusion Action
1. Restart the treadmill and E6 or E7 signal appears, please check follow the second step.
2. Force incline ascend or descend to test whether the incline motor and the wire of
transmission signal is normal. The key operations are as following. We emphasize that you
should be cautious to make incline ascend or incline descend to avoid the damage of
controller or incline motor. If the action of force to drive incline motor can’t work, please
contact with your manufacturer.
A. When the incline angle of treadmill is on high position (as drawing 1). At this time you
should press STOP and hold it tightly, then press DOWN at the same time. Hold the two
keys for 3~5 seconds simultaneity and the incline motor will force the treadmill descend
the incline height. Check whether the feedback value of incline motor near the error
information window will change with incline descend and be adjusted to 100. If shows
the feedback value and change with incline, you can just release keys to make incline
position back to the pre-set position.
(Drawing 1)
B. When the incline angle of treadmill is on low position (as drawing 2). At this time you
should press STOP and hold it tightly, then press UP at the same time. Hold the two keys
for 3~5 seconds simultaneity and the incline motor will force the treadmill ascend the
incline height. Check whether the feedback value of incline motor near the error
information window will change with incline descend and be adjusted to 100. If shows
the feedback value and change with incline, you can just release keys to make incline
position back to the pre-set position.