PAGE 1 OF 6
0321 IH-8476
WIRE SHELF BIN
ORGANIZER
1-800-295-5510
uline.com
INSTRUCTIONS FOR UNIT ASSEMBLY
Figure 3
INSTALLATION OF SELF-LEVELERS AND OPTIONAL CASTERS
03
04
05
06
07
08
09
03
04
05
06
07
08
09
Figure 1
Figure 2
TO INSTALL SELF-LEVELERS
NOTE: If installing casters, do not install self-levelers.
1. Make sure post is positioned as shown. (See Figure 1)
2. Insert self-leveler into open end of post.
3. Tap on ground until self-leveler slides into post.
4. Repeat steps 2 and 3 for other posts.
TO INSTALL OPTIONAL CASTERS
1. Make sure post is positioned as shown. (See Figure 2)
2. Engage the wheel brakes to keep casters from rolling during
assembly. Use a rubber mallet to tap caster stems into posts.
(See Figure 2)
1. Start with the lowest shelf. Snap the interlocking pieces of a
shelf support (wide end down) around the post at the lowest
groove where shelf is to be located. Slide the support up or
down until it snaps onto the groove. Add a shelf support to the
same place on the remaining posts. (See Figure 3)
PARTS
Self-Leveler x 4
Post x 4
Shelf x 12
Shelf Support x 48 Sets
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
