2
u-line.com
2 Inspect & Plan
Product Registration
You have received a carton containing your U-Line Clear Ice, Ice or
Ice Combo unit with a package inside containing a Use and Care
Guide, a Product Registration Card, and a water line kit. Please
complete and mail the Product Registration Card or register online
at www.U-LineService.com. Once your unit is installed, keep the
Use and Care Guide and this Installation Guide in a safe place for
future reference.
Product Description
This installation guide covers the following models.
Inspection
Unwrap and inspect the unit on a flat, level surface capable of
supporting it’s entire weight. If necessary remove protective film
from Stainless Steel models.
U-CLR2160B-00
U-CO1175B-20
U-CLR2160B-40
U-CO1175S-00
U-CLR2160S-00
U-CO1175S-01
U-CLR2160S-01
U-CO1175S-20
U-CLR2160S-40
U-CO1175S-22
U-CLR2160S-41
U-CO2175FB-00
U-CLR2160SOD-00
U-CO2175FS-00
U-CLR2160SOD-01
U-CO2175FS-01
U-CLR2160SOD-40
U-CO2175FW-00
U-CLR2160SOD-41
U-CO29B-00
U-CLR2160W-00
U-CO29B-03
U-CLR2160W-40
U-CO29B-20
U-CLRCO2175B-00
U-CO29BTP-20
U-CLRCO2175B-40
U-CO29FB-00
U-CLRCO2175S-00
U-CO29FB-98
U-CLRCO2175S-01
U-CO29FB-99
U-CLRCO2175S-40
U-CO29FWH-00
U-CLRCO2175S-41
U-CO29WH-03
U-CO1175B-00
U-CO29WHTP-20
Tools / Material Required
• Screwdrivers — slotted, Phillips head
• 1/4-inch thick door panel material and cutting tools (If installing
a 1/4" Panel)
• 1/4" Nut Driver
• 5/16" Nut Driver
• Side Cutter
• Copper tubing cutter
• 12" Level
• 9/16" Open end wrench
• 7/16" Open end wrench
• Pliers
• Copper tubing
CO2175 Models Only
• Full Overlay Door Panel Kit. Part number U-OL2175B (black
units) U-OL2175W (white units)
A complete water hook up kit is also available for purchase from
your dealer. Order U-Line Part No. WATERHOOKUP.
Exterior Cleaning
Black and White Models:
• Black and White surfaces may be cleaned with a mild detergent
and warm water solution. Do not use solvent-based or abrasive
cleaners. Use a soft sponge and rinse with clean water. Wipe
with a soft, clean towel to prevent water spotting.
Stainless Models:
• Stainless door panels, handles and frames can discolor when
exposed to chlorine gas, pool chemicals, salt water or cleaners
with bleach.
• Keep your Stainless unit looking new by cleaning with a good
quality all-in-one stainless steel cleaner/polish on a monthly
basis. For best results use Claire Stainless Steel Polish and
Cleaner, which can be purchased from U-Line Corporation
(Part numbers 173348). Frequent cleaning will remove surface
contamination that could lead to rust. Some installations may
require cleaning on a weekly basis.
• Do not clean with steel wool or abrasive pads.
• Do not use cleaners that are not specifically intended
for stainless steel on stainless surfaces (this includes
glass, tile and counter cleaners).
• If any surface discolors or rust appears, clean it quickly with
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive
cloth. Always clean in the direction of the grain. Always finish
this process with Claire Stainless Steel Polish and Cleaner or
comparable product to prevent further problems.
CAUTION
!
Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of the
rust may not be possible.
