U-Line Product Operation
4
Food Storage Chart
The 3036 Models have two independently controlled zones. Each
zone may have its own mode and set point. The 3018 models have a
single zone. Available Mode Settings will vary with model.
1. In order to adjust temperatures in the 3036 you must first select
a Zone to adjust. To select, press Zone Toggle
. The left side
Mode Setting will flash. Pressing Zone Toggle
again will select
the right side and the right side Mode Setting will flash. For 3018
Models simply press Select
to alter Mode Settings.
2. Pressing Select
will cycle through the available modes for
your model. Reference the Mode Settings Chart on
pg 3
for
each Setting’s default set point and range.
3. Once your have selected your desired Mode the default set
temperature will display. You may further fine tune the
temperature by pressing Up
or Down
.
Quick Chill
CAUTION
A number of zones include a quick chill feature. Quick
chill is designed to quickly pull warm beverages and foods
down to optimum storage temperature. It is important to
only initiate quick chill modes when the Refrigerator or
Wine Captain® have been fully loaded with warm
product. Failure to follow this notice could result in food
or beverages that are cooled to a point below optimum or
frozen.
The following table lists modes which include the quick chill feature
and the time which quick chill will run.
To Initiate quick chill.
1. In 3036 models use Zone Select
to select the desired zone,
left or right.
2. Press Select
to select the desired mode setting.
3. Press Down
until the temperature set point reads “Quick”
The quick chill feature will then begin for the period of time
dictated by the mode type. To cancel quick chill, simply select a set
point other then “quick”.
Note:
There may be a delay before quick chill is activated in 3036
models. If the opposite zone is currently in a cooling cycle while
quick chill is selected, the cooling cycle on the opposite zone will
first be completed.
Note:
Please note, that when quick chill is activated in a 3036, the
zone opposite the active quick chill zone will not return to a
cooling cycle until quick chill is complete. If storing product in the
opposite zone it is important to limit the number of times the
door is opened in the zone not currently under quick chill.
Interior Lighting
Your U-Line 3000 Series unit uses a state of the art LED lighting
system. The 3036 model dual zone’s lighting can be independently
controlled or set as a group.
3036 Model
1. To begin, press U-Select Lighting
to enter the lighting menu.
2. In 3036 Models the unit initially defaults to control the lighting in
both Zones simultaneously. To select a single zone press Zone
Toggle
. Notice the arrows on top of the display changing
state. Pressing Zone Toggle
once will select the left side
zone, pressing it again will select the right side zone, pressing it a
third time will select both zones again.
3. Use Up
or Down
to cycle through each available
brightness setting; Low, Medium, or High.
4. Use U-Select Lighting
to cycle through each available timer
setting. Selections include “On With Door”, “On 3 Hours”, “On
6 Hours”, or “On 24 Hours”.
5. To exit, press Select
or simply wait for the menu to time out.
Mode
Food Types
Deli
Meats, Fish, Cheeses, Dairy, Butter, Garlic, Oils,
Nuts, Condiments
Market
Fruits, Vegetables, Berries, Lettuce
Pantry
Dry Goods, Breads, Baking Items, Spices,
Seasonings
Root
Root Vegetables, Potatoes, Onions, Lemon, Lime,
Melon, Peppers, Beans, Cucumber, Cut
Vegetables
Mode
Run Time
Beverage
4 Hours
Deli
5 Hours
Market
4 Hours
Pantry
4 Hours
Red Wine
Not Available
Root
1 Hour
Sparkling
1 Hour
White Wine
1 Hour
Up
Zone Indicator
Zone Indicator
Zone Toggle
Select
Down
U-Select Lighting
Power
3036 Model Display Shown
U-SELECT LIGHTING
ON WITH DOOR
LIGHTING
HIGH
LEVEL
