QUICK START GUIDE
9
u-line.com
2200 SERIES ZWC
First Use
All U-Line controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
U-Line recommends allowing the unit to run
overnight before loading with product.
When plugged in, the unit will begin operating under the
factory default settings. If the unit was turned off during
installation, simply press and the unit will immediately
switch on. To turn the unit off, press
.
Up Down
Light Power Auxiliary
Alert
LED
CONTROL FUNCTION GUIDE
FUNCTION
COMMAND
DISPLAY/OPTIONS
ON/OFF
Press
and release
Unit will immediately turn ON or OFF.
Toggle lights
Press
and release
Leave interior light on for 3 hours.
Adjust temperature
Press
and
release
The zone you are setting will have its light turned on
(top zone first).
Press
to adjust set point
temperature
Display will show the set temperature.
Press
to change zones
Light will switch from top zone to the bottom zone.
Press
to adjust set point
temperature
Display will show the set temperature.
Press
to confirm and exit
View temperature in unit
Press
together and release
The display will flash and then toggle from set point
to temperature in unit. The temperature shown will
correspond to the illuminated zone.
Toggle between F/C
Hold
for 5 seconds
The display will change units.
or
or
or
and
and
