U-Line U-1224RFS-00B User Manual & Service Manual Download Page 31

USER GUIDE

 Warranty Claims 1

SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • 

SERVICE

Warranty Claims 

The following information defines the parameters for filing 
a warranty claim:

• Valid serial number needed

• Valid model number needed

• Narda (or equivalent) form or submitted online at

www.u-line.com

• 60 day submittal deadline from date of completed

service

• Only one repair or unit per warranty claim

• Refrigerant should be labeled and included on the labor

submittal

• Door and water level adjustments are covered 30 days

from install date.

Serial Number Requirements:

A typical serial number is shown above. The first two 
digits of the first segment, 14, represents the production 
year. The number between the dashes, 12, represents the 
production month. In most cases, warranty status can be 
verified by the production date information within the 
serial number. 

• Alternatively, a Proof of Purchase (or equivalent) may

submitted with the warranty claim to document

warranty status. We also accept the following 
information to verify warranty status:

• New Construction Occupancy Documents

• Closing  Paperwork

• Final Billing – Remodel

Noting all of the following on the warranty claim will be 
considered proof of purchase, hard copy will not be 
required:

• Name of the selling Dealer

• Date of purchase/installation

• Order or Invoice number (if available)

• Description of document reviewed (i.e. store receipt,

closing paperwork, etc)

Parts and labor claims are paid separately. Indicate part 
numbers and description for parts used in the warranty 
repair. Include the purchase invoice and name of the parts 
supplier used to procure the parts. 

14 30911 12  X X X X

Year

Month

31

Summary of Contents for U-1224RFS-00B

















































Reviews: