PAGE 3 OF 8
0822 IH-10166
OPERATION
POWER SUPPLY
STOP! Before using, ensure the connector plug
is securely attached to the base and that the
power plug is plugged into a polarized outlet.
NOTE: Always unplug the vacuum by grasping
the power source plug (not the power cord)
and disconnecting from the outlet.
The power cord is stored at the back of the vacuum
and is looped around the quick release cord hooks.
The plug is designed to attach to the power cord
during storage.
POWER SWITCH
The power switch is located
in the handle of the
vacuum. (See Figure 6)
• Push down (I) to turn on.
• Push up (O) to turn off.
POWER CORD STORAGE
When finished using vacuum, return it to the upright
position. Ensure vacuum is turned off.
NOTE: Always unplug the vacuum by grasping
the power source plug (not the power cord)
and disconnecting from the outlet.
Wind the cord around
the quick release cord
hooks on the back of the
vacuum, or hang on the
cord storage hook on the
front of the vacuum. Attach
the plug end to the power
cord. (See Figure 7)
VACUUM USE
This vacuum is designed to effectively and safely clean
all types of carpeting, wood, linoleum and vinyl floors.
To place vacuum in position for use, lightly press foot on
the base and pull the handle backward.
(See Figure 8)
Figure 6
Figure 8
Figure 7
Cord
Storage
Hook
