U-Line Refrigerator/Ice-Maker Combos User Manual Download Page 20 | Manualshive

Page: 20 / 38

background image

18

User’s Manual

REVERSING A STAINLESS STEEL DOOR

Stainless Steel models are field
reversible for left or right hand
opening. The door opening is easily
reversed by moving the hinge hard-
ware to the opposite side (see Figure
26) as follows:

1.

Remove the bottom hinge (2
screws) from door.

2. Remove top hinge (2 screws)

from door.

3. Remove

door.

4. Remove top hinge (4 screws)

from cabinet. Invert and install on
bottom, opposite side of cabinet.

5. Remove bottom hinge (4 screws)

from cabinet. Invert and install on
top, opposite side of cabinet.

6. Attach top hinge to door.

7. Attach bottom hinge to door.

8. Align as required to assure proper door seal.

ALIGNING THE DOOR

For proper door alignment:

1. Loosen top and bottom hinge screws (see Figure 16).

2. Align door squarely with cabinet.

3. Assure gasket is firmly in contact with cabinet all the way around

the door (no gaps).

4. Tighten bottom hinge screws.

5. Tighten top hinge screws.

UL318C

Figure 26

Users Manual 41923 9/2/03 3:44 PM Page 18

«
...
18
19
20
21
22
...
»

Summary of Contents for Refrigerator/Ice-Maker Combos







































Reviews:

No comments

Related manuals for Refrigerator/Ice-Maker Combos

Brand: ZAGGIA Pages: 18

Brand: icetro Pages: 50

Brand: Unold Pages: 96

Brand: Curtis Pages: 18

nina plus SIN026X

Brand: Saeco Pages: 24

Brand: Beper Pages: 32

DESIGN COFFEE AROMA PLUS

Brand: Gastroback Pages: 44

Brand: RUSTA Pages: 20

Brand: Gaggia Pages: 20

Brand: Wilfa Pages: 52

Brand: Orbegozo Pages: 19

Brand: Jata hogar Pages: 2

INFOTAG KE28 Series

Brand: InfoSight Pages: 34

Stoelting CC202W

Brand: Vollrath Pages: 39

Brand: Carl Valentin Pages: 172

Brand: Brother Pages: 163

Brand: Brother Pages: 84

Brand: Brother Pages: 166

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands