background image

BI95, BI98, SP18

9

Product Disposal

If the unit is being removed from service for disposal, 
check and obey all Federal, State and/or Local regulations 
regarding the disposal and recycling of refrigeration 
appliances, and follow these steps completely:

1. Disconnect power to the unit and unplug the power 

cord from its outlet.

2. Shut off water supply to the unit at the main water 

source and disconnect the supply line to the unit’s water 
valve.

DANGER

RISK OF CHILD ENTRAPEMENT. Before you throw 
away your old refrigerator or freezer, take off the 
doors and leave shelves in place so that children 
may not easily climb inside.

3. Remove the cabinet door if equipped and secure all 

interior shelves to the interior of the cabinet using a 
heavy duty cloth or package sealing tape.

General Cleaning

Exterior Cleaning (As Required)

Black and White Models:

• Surfaces may be cleaned with a mild detergent and 

warm water solution. Do not use solvent-based or 
abrasive cleaners. Use a soft sponge and rinse with 
clean water. Wipe with a soft, clean towel to prevent 
water spotting.

Interior Cleaning (As Required)

• Turn unit off. Clean the interior and all removed 

components using a mild non-abrasive detergent and 
warm water solution applied with a soft sponge or 
non-abrasive cloth. Rinse the interior using a soft 
sponge and clean water.

• Do not use any solvent-based or abrasive 

cleaners. These types of cleaners may transmit 
taste to the interior products and damage or 
discolor the interior.

6 Cleaning and Maintenance

Summary of Contents for Origins BI-95





















Reviews: