background image

PAGE 1 OF 3 

0712 IH-708

π  H-708
MONARCH 1115

TWO LINE LABEL GUN

1-800-295-5510

uline.com

CHANGING THE INK ROLLER

1. 

Push the two latch 

buttons in toward label 

roll and swing top 

cover away from print 

head. (See Figure 1)

2. 

Insert folded backing 

paper between ink 

roller and carrier. Pull 

to snap old ink roller 

free. (See Figure 2)

3. 

Cut off end of ink 

roller package. Using 

package to protect 

fingers, slide carrier 

into package and 

snap new ink roller into 

place. (See Figure 3) 

4. 

Snap top cover closed. 

SETTING PRINT CHARACTERS

1. 

Pull knob until 

indicators are on the 

desired band. 

(See Figure 4)

2. 

Turn the knob until 

the desired character 

appears black on a 

white background 

between the indicators. 

(To print a blank, select 

a blank space for that 

band).

3.  Repeat steps 1-2 for each band.

4.  Push in the knob when you are done.

LOAdING LAbELS

1.  For loading a new roll of labels, tear off and discard 

the first 10 inches of label and liner. Tear backing 

evenly between cuts. 

2.  Peel the first 12 labels from liner and discard.  

3. 

Place the label roll 

between the hubs and 

click into place. (See 

Figure 5) 

4. 

Feed the label strip 

through the hole in  

the feed guide.  

(See Figure 5)

5. 

Squeeze and hold the 

trigger while feeding 

the label strip into the 

slot below the brake 

wheels until about 6 

inches come out of the 

front. (See Figure 6)

6. 

Feed label strip under 

the plate and pull 

through until loop is 

removed. (See Figure 7) 

7.  Squeeze and hold the 

trigger while feeding 

the label strip into the 

slot below the arrow 

until it stops/hits the 

back. (See Figure 8) 

8. 

Hold the strip in place 

and squeeze the trigger 

eight times or until 

backing paper feeds 

through the rear exit. 

9.  Remove any loose labels. 

NOTE: If backing paper does not become taut 
and exit at rear: Turn labeler upside down, 
squeeze trigger and pull backing paper out of 
slot. Repeat steps 6, 7 and 8.

1115

CARRIER

TOP COVER

LATCH

BUTTON

Figure 1

Figure 2

Figure 3

LABEL EXIT

BRAKE

WHEELS

TRIGGER

HUB

FEED GUIDE

Figure 5

Figure 6

Figure 4

INSTRUCTIONS

LABEL EXIT

PLATE

LOOP

LABEL EXIT

PLATE

LOOP

SLOT

BACKING

PAPER EXIT

Figure 7

Figure 8

Reviews: