PAGE 3 OF 21
0222 IH-9752
7. Attach two base brackets to legs opposite of modesty
panel with four M4 x 16 mm screws. (See Figure 6)
8. Insert floor glides into legs. (See Figure 7)
9. With second person, set desk upright. Adjust floor
glides to compensate for uneven floors.
To finish desk assembly, proceed to Transaction
Counter assembly on page 6.
DESK ASSEMBLY CONTINUED
Figure 6
M4 x 16 mm Screw
Base Bracket
Figure 7
RECEPTION L-DESK PARTS
M6 x 12 mm Bolt x 12
M6 x 65 mm Bolt x 6
L-Bracket x 4
Camlock Pin x 3
Camlock x 3
M6 x 15 mm Bolt x 4
Connector Bracket x 1
Dowel x 2
M4 x 16 mm Screw x 4
Small Camlock Cap x 2
Large Camlock Cap x 3
Black Grommet Cap
x 1
Silver Grommet Cap
x 1
Floor Glide x 2