PAGE 5 OF 24
0322 IH-9730
L-DESK RETURN ASSEMBLY CONTINUED
3. Push pedestal file (9) toward modesty panel (4) to hook
keyhole tabs on shoulder screws (K). (See Figure 10)
4. Attach back of pedestal file (9) to side panel with left
L-bracket (I) and four M6 x 15 mm bolts (F). Repeat
at front of pedestal file with right L-bracket (J)
and four M6 x 15 mm bolts. (See Figure 11)
5. Repeat steps 1-4 to install remaining pedestal file
on opposite side.
6. Attach connector plate (G) to desktop panel (1)
with four M6 x 15 mm bolts (F). (See Figure 12)
7. With second person, set desk upright.
NOTE: Before proceeding, make sure desk is
positioned where it is intended to be used.
It is difficult to move when fully assembled.
8. Align L-desk modesty panel (8) with holes in
L-desk side panel (7). Use three M6 x 45 mm bolts (B)
to secure. (See Figure 13)
NOTE: For left-hand L-desk configuration,
L-desk side panel should be attached to
opposite side of the L-desk modesty panel.
9. Attach adjustable glides (C) to bottom corners of
each leg frame. (See Figure 13)
Figure 12
G
F
1
Figure 13
7
B
8
C
Figure 10
K
Keyhole Tab
9
4
Figure 11
I
F
9
