PAGE 2 OF 9
1021 IH-9645
Figure 3
ASSEMBLY CONTINUED
Figure 2
2. Secure legs to undershelf with set screws using 5/32"
Allen wrench. (See Figure 2)
NOTE: Undershelf must be level. Use care not to
overtighten screws or failure will occur.
3. Flip tabletop over. Insert leg and shelf assembly into
tabletop gussets. Secure legs to tabletop with set
screws using 5/32" Allen wrench. (See Figure 3)
4. Hold caster base and rotate nylon bushing
clockwise. This will cause the rubber piece to
expand. (See Figure 4)
5. Expand the rubber enough so that it will fit snugly
into the tube leg.
Set Screw
Gusset
Figure 4
Rubber
Expansion Piece
Nylon Bushing
Caster Base