U-Line H-9608 Assembly Instructions Download Page 2

Page: 2 / 3

PAGE 2 OF 3

1021 IH-9608

NOTE: Recommended mounting height is 52"
from floor to bottom of dispenser.

NOTE: Ensure that proper mounting hardware
is used for appropriate wall composition as

enclosed hardware may not be compatible
with wall surface.

1. Insert metal key all the way into lock opening on

top of dispenser and rotate clockwise until the cover

opens. (See Figure 3)

2. Open dispenser cover and hold dispenser to ideal

mounting place on wall. (See Figure 4)

3. Mark four holes on the wall where screws will be

inserted. (See Figure 5)

4. Drill into wall at marked locations with 1/4

drill bit.

(See Figure 6)

5. Hold dispenser to wall so holes in dispenser align

with previously drilled holes in wall. Insert wall

anchors and screws.

MOUNTING

Figure 3

Figure 4

Figure 5

Recommended

Mounting

Locations

Figure 6

Summary of Contents for H-9608

Page 1: ...ign snap in key with lock on top of dispenser and push in until it snaps into place See Figure 1 2 Rotate snap in key clockwise to open dispenser See Figure 2 NOTE Snap in key cannot be removed once i...

Page 2: ...of dispenser and rotate clockwise until the cover opens See Figure 3 2 Open dispenser cover and hold dispenser to ideal mounting place on wall See Figure 4 3 Mark four holes on the wall where screws...

Page 3: ...Repeat step three of loading instructions Figure 9 STUB ROLL LOADING 1 Open dispenser cover completely See Figure 7 2 Push a roll of product into the holders and release when the core becomes engaged...