PAGE 2 OF 9
0321 IH-9417
3. Slide leg latch onto each leg brace. (See Figure 3)
4. Slide J-Channel over two leg braces. (See Figure 4)
5. Insert leg braces into J-Channel still connected to
tabletop. (See Figure 5)
6. Replace five screws removed in step 1 using Phillips
screwdriver. (See Figure 6)
7. Open leg braces. (See Figure 7)
8. Insert legs into leg braces. (See Figure 8)
NOTE: Legs should curve toward center.
NOTE: Tabs should face ends.
9. Remove six screws from one J-Channel on bench
seat using Phillips screwdriver. (See Figure 9)
ASSEMBLY CONTINUED
Figure 6
Figure 4
Figure 5
Figure 3
Leg
Latch
Leg
Latch
J-Channel
Figure 9
Figure 8
Tab
Figure 7
