U-Line H-9235, Manual, Page: 3 / 24

PAGE 3 OF 24 0721 IH-9235
ASSEMBLY CONTINUED
c. Remove alignment hole pins where hip rafters (HR)
are attached to crown. (See Figure 7)
4. Repeat steps 3b-3c to connect three full rafters (FR)
to the 6-way crown. (See Figure 8)
5. Beginning at a corner fitting, attach eave poles (EV)
to corner fittings and 4-way side tee fittings, working
clockwise around the assembly to complete the first
end bay. Attach to hip rafters (HR) and full rafters (FR).
(See Figures 9-10)
6. Repeat steps 2-5 to complete second end bay.
(See Figure 11)
7. Move end bays together and connect with ridge
pole (RG) and two eave poles (EV). Secure with
frame pins. (See Figure 12)
8. Loop end of each ratchet strap to fitting at each
leg location. (See Figure 13)
RG
EV
EV
Figure 11
Figure 12
Completed
Second
End Bay
Figure 13
Ratchet
Strap
Figure 7
Figure 8
HR
FR
FR
FR
HR
Figure 9
EV
EV
HR
Figure 10
Completed
First End Bay
FR