PAGE 3 OF 12
0721 IH-9189
ASSEMBLY CONTINUED
5. Insert cam lock pins (A) and dowels (F) into left
side panel. Insert cam locks (B) into bottom panel,
fixed shelf, back panel, and skirt panel. Attach
panels and tighten cam locks using a Phillips head
screwdriver. (See Figure 4)
6. Insert adjustable glides (G) into bottom of side
panels. (See Figure 4)
7. Align holes on plug (J) with pre-drilled holes in
top panel and gently tap with a rubber mallet to
insert. Insert cam lock pins (A) and dowels (F) into
top panel. Insert cam locks (B) into back panel,
right side panel and left side panel. Attach top
panel and tighten cam locks using a Phillips head
screwdriver. (See Figure 5)
8. Place cabinet upright. Insert shelf dowels (H) into
side panels. Place shelves inside cabinet and
ensure shelf supports lower onto shelf dowels.
Tighten shelf supports in underside of shelves for a
secure fit. (See Figure 6)
9. Place left door and right door panels on a smooth,
non-marring surface to prevent scratching. Snap
door hinge wing and frame hinge wing together.
Align holes in hinge (D) with pre-drilled holes in door
panel. Insert two M4 x 10 mm screws and tighten
using a Phillips head screwdriver or drill. Repeat for
seven remaining hinges. (See Figure 7)
10. Attach handles (C) to the outside of the door panels
using M4 x 22 mm screws and a Phillips head
screwdriver. (See Figure 7)
Figure 5
A
J
F
B
Top
Panel
Figure 6
Shelf Support
H
Figure 7
D
C
Right Door
Left Door
+
Figure 4
F
B
A
Left Side
Panel
G
Hinge Assembly
