PAGE 2 OF 6
0321 IH-8788
1. Adjust magnifier head to desired position. Tighten
adjustment knob to secure head tilt. To lock side to
side movement, use 4 mm Allen wrench to tighten
bolt on head. (See Figure 3)
2. Lift the magnifier cover and use control pad to
operate LED lights. (See Figure 4)
OPERATION
Figure 3
Figure 4
Power
Brighter
Dimmer
1. To remove included lens, grasp holds on each side
of lens ring and turn counterclockwise 90°.
(See Figure 5)
2. Using both hands, lift upward on bottom of lens
to remove from magnifier. Store lens in a secure
location for future use.
3. Place new lens with attached lens ring into the
magnifier housing.
4. Grasp holds on each side of ring and turn lens
clockwise until feeling the plastic tabs on the ring
click into place. The lens will not be able to turn any
further.
5. To remove lens, follow the steps above. Replace with
a different optional lens or the lens included with the
magnifier, and the included lens ring.
ADDITIONAL LENSES
Figure 5
1-800-295-5510
uline.com
