PAGE 2 OF 6
0621 IH-878
LOADING INSTRUCTIONS
1. Remove perforated tab from toilet seat cover pack.
2. Insert pack from bottom of dispenser. Push the
bottom of the pack towards the front of dispenser to
keep it in place. (See Figure 4)
MOUNTING INSTRUCTIONS − SCREWS
NOTE: Screws are not included with dispenser.
1. Hold dispenser up to desired location and mark two
holes on the wall where screws will be inserted.
(See Figure 2)
2. Drill into wall at two marked locations with
appropriate-sized drill bit. Insert wall anchors if
necessary. (See Figure 3)
3. Hold dispenser over previously drilled holes and
insert screws.
Figure 3
Screw Locations
Figure 2
Figure 4
1-800-295-5510
uline.com
