PAGE 2 OF 9
0621 IH-8512
ASSEMBLY CONTINUED
2. Use backrest and backrest mounting kit to assemble.
Align plastic holder, post and steel plate to backrest.
Use Allen wrench to tighten with supplied screws.
Place cover over assembly. (See Figure 2)
3. Align mechanism with holes on bottom of seat. Use
four seat screws to attach. (See Figure 3)
NOTE: Use Allen wrench to tighten screws.
4. Place plastic cover over socket on mechanism and
slide assembled backrest post through plastic cover
and into socket. Insert plastic stopper and tighten
knob to secure. (See Figure 4)
5. Slowly lower stool assembly onto the gas lift. Press
down on seat to secure.
Figure 2
Plastic Cover
Steel Plate
Plastic Holder
Socket
Screw
Post and
Optional Cover
Figure 4
Figure 3