U-Line H-8381 Manual Download Page 2

Page: 2 / 6

PAGE 2 OF 6

0721 IH-8381

ASSEMBLY CONTINUED

3. Slide mounting bracket (A) onto tabletop edge. Use

three M6 screws (D or E) to secure. Tighten screws

under tabletop with 3 mm Allen wrench. Repeat for

remaining brackets. (See Figure 3)

NOTE: For 1" tabletops, use M6 x 8 mm
screws (D). For 3/4" tabletops, use M6 x 15 mm
screws (E).

NOTE: To avoid damage to tabletop, do not

overtighten screws.

Figure 3

D/E

1-800-295-5510

uline.com

Summary of Contents for H-8381

Page 2: ... screws D or E to secure Tighten screws under tabletop with 3 mm Allen wrench Repeat for remaining brackets See Figure 3 NOTE For 1 tabletops use M6 x 8 mm screws D For 3 4 tabletops use M6 x 15 mm screws E NOTE To avoid damage to tabletop do not overtighten screws Figure 3 D E 1 800 295 5510 uline com ...

Page 4: ...os Apriete los tornillos debajo de la mesa con la llave Allen de 3 mm Repita la operación con los soportes restantes Vea Diagrama 3 NOTA Para las cubiertas de 1 use los tornillos M6 x 8 mm D Para las cubiertas de 3 4 use los tornillos M6 x 15 mm E NOTA Para evitar daños a la cubierta no apriete los tornillos de más Diagrama 3 D E 800 295 5510 uline mx ...

Page 6: ...urface de table avec une clé Allen de 3 mm Répétez cette étape pour les supports restants Voir Figure 3 REMARQUE Pour les surfaces de table de 1 po utilisez les vis M6 x 8 mm D Pour les surfaces de table de 3 4 po utilisez les vis M6 x 15 mm E REMARQUE Ne serrez pas trop les vis afin d éviter d endommager la surface de table Figure 3 D E 1 800 295 5510 uline ca ...