PAGE 4 OF 27
0621 IH-7630
BOTTOM SHELF DIVIDER ASSEMBLY
1. Four bottom shelf dividers (8) are included with
packing station. To attach, slide shelf dividers
in-between full depth bottom shelf and 4" high
storage shelf and line them up with two pre-drilled
holes in each shelf. Fasten each divider with four M6
Phillips head bolts and four M6 flange nuts using a
Phillips screwdriver and 10 mm wrench.
(See Figure 10)
Figure 10
Pre-drilled
Holes
UPRIGHT ASSEMBLY
1. Position upright (9) on back corner of tabletop.
Mounting plate should be positioned directly over
the previously drilled holes. Fasten four M6 x 70 hex
bolts and flat washers through uprights, tabletop
and legs using 10 mm wrench. Secure with four M6
flange nuts on underside of table. (See Figure 11)
Figure 11
Upright
Washer
M6 x 70 mm
Bolt
Flange
Nut
Mounting
Plate
Upright
Leg
2. Repeat with other upright.
ASSEMBLY CONTINUED
