PAGE 3 OF 12
0321 IH-7584
ASSEMBLY
ASSEMBLING MAIN PANELS
NOTE: Do not tighten bolts until unit is
completely assembled.
1. Place back (1) on a protected flat surface so that
the flanges face upward.
2. Bolt side (2) to back (1) so that side flange fits
around back (use 8 bolts and nuts - nuts to the
inside). Do not use bottom 2 holes; these will be
used for attaching legs in step 6. (See Figure 1)
3. Next, bolt top (7) and bottom (7) to back and left
side panel (use 4 bolts and nuts each). Bolt shelf (4)
to left side panel (use 2 bolts and nuts).
(See Figure 2)
4. Bolt right side to the back so that side flange fits
around back. Attach side to top, bottom and shelf.
(See Figure 3)
5. Attach coat hooks (5 and 6) to locker's side and
back panels:
• Side – 1 side hook (6) on each side, 1st and 2nd
holes below shelf. (See Figure 3)
• Back – 1 back hook (5) on each back, 3rd and 4th
holes below shelf. (See Figure 3)
Figure 1
Bottom End of Locker
1
2
Figure 2
7
7
4
Figure 3
5
6
2
