PAGE 1 OF 3
0218 IH-7206
π
H-7206
LD3500 AUTOMATIC
LABEL DISPENSER
1-800-295-5510
uline.com
NOTE: Machine must be unplugged from power
supply for steps 1 to 7.
1. Lift reel holder arm at 90° angle and lock into position
using provided hex wrench. (See Figure 1)
1. Turn machine off when not in use.
2. Remove liner material from take-up hub when it
reaches approximately 2" in diameter or if the motor
appears to be straining.
3. Do not operate if inspection reveals a damaged
power or sensor cord.
4. Keep strip plate, hold-down and hub free of adhesive
buildup.
MAINTENANCE
INSTRUCTIONS
Guide Rod
Strip Plate
Hold-Down
Photosensor
Take-up
Hub
Reel
Hanger
Bar
Reel
Holder
Arm
Figure 1
Reel Holder Arm
