background image

PAGE 1 OF 9 

0721 IH-6732

H-6732

FIRE RATED 

FLOOR SAFE

1-800-295-5510

uline.com

TOOLS NEEDED

HARDWARE INCLUDED

Drill

70 mm Lag 

Screw x 2

Washer x 2

40 mm Plastic Anchor 

x 2

7/16" Drill Bit

3/8" Drill Bit

Phillips Screwdriver

17 mm Wrench

USAGE

IMPORTANT! Record serial number from the tag 
on the back of the safe or from the tag on the 
front bottom corner of safe.

Keep keys and combination in a secure place, 
away from children.

Do not store the backup key, combination or 
this document in the safe.

WARNING! Keep safe closed and locked at 
all times when not in use. Children could 
accidentally be locked inside the safe.

Do not move this safe using its handle. The 
handle should only be used for opening and 
closing the door of the safe.

Do not store electronic media, computer disks, 
audio-visual media or photographic negatives 
in this safe. This material will not survive the 
rated internal temperature of the safe. This 
material may be damaged or destroyed.

HANDLE ASSEMBLY

1.  Screw three handle spokes into hub and hand 

tighten. Spokes are located in front foam 
packaging. (See Figure 1)

NOTE: Do not use this handle to move the safe.

BATTERY INSTALLATION

1.  You must first install the battery, which is located in 

the front protective styrofoam.

NOTE: When changing the battery, always 
hold the battery connecting cap while 
disconnecting or attaching the battery. Do not 
pull on the wires. Doing this could cause the 
power supply to become disconnected from 
the lock.

2.  This safe uses one 9V alkaline battery.

3.  When the battery is low and you press a button on 

the keypad, a red light will turn on, warning you that 
the battery is low.

4.  To replace battery, remove cover by pressing tab 

and turning cover. (See Figure 2) 

5.  Replace old battery and screw cover back in place.

Figure 2

Figure 1

Para Español, vea páginas 4-6.

Pour le français, consulter les pages 7-9.

Summary of Contents for H-6732










Reviews: