U-Line H-5784 Quick Start Manual Download

Page: 3 / 3

PAGE 3 OF 3

0716 IH-5663

USAGE CONTINUED

BACKUP KEY

A backup key has been provided in case you have

forgotten or lost your security code. To open the safe

using the backup key, follow the steps below:

1. Remove the cover by pressing the tab and turning

the cover. (See Figure 4) The lock can hang by the

connecting cable while unlocking the safe.

2. Insert the key in the key hole and turn clockwise

1/4 turn (until stopped) in order to unlock the safe.

Rotate the handle and open the door.

3. Keep the door open until you have entered a new

security code. Before entering your new code,

remove the key and screw the cover back in place.

4. Enter your new security code following the

instructions on page 2.

CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA

1-800-295-5510

uline.com

Figure 4

Summary of Contents for H-5784

Page 1: ...BATTERY INSTALLATION 1 You must first install the battery which is located in the front protective styrofoam NOTE When changing the battery always hold the battery connecting cap while disconnecting...

Page 2: ...Because the locking mechanism is deactivated for approximately 3 to 6 seconds after the combination is entered wait a minimum of 6 seconds from the time the combination is entered to lock the safe TU...

Page 3: ...ecting cable while unlocking the safe 2 Insert the key in the key hole and turn clockwise 1 4 turn until stopped in order to unlock the safe Rotate the handle and open the door 3 Keep the door open un...