PAGE 2 OF 6
0621 IH-4601
SETUP CONTINUED
6. Display shows
C 20
. Change this to
C 30
and press
the
(Enter) button.
a. Display shows
C 30
and a number on the right.
C 30
is short for Code 30, which signifies the
date format.
b. Change the number on the right to achieve
desired date format (see below) and press the
(Enter) button.
• #1 = mm.dd.yy
• #2 = dd.mm.yy
• #3 = yy.mm.dd
7. Press the
COUNT
button to exit.
8. Display is now set up to match the printer. Press the
button on the LP-7510 display and the printer
should print.
HOW TO PRINT
1. To change the printing mode, press the
SEL
button
on the printer once and the green status light should
be on. If the green status light is already on, then
pressing the
SEL
button is not necessary because
the printer is already in printing mode.
2. Press the
button on the indicator and the
printer should start printing. Remember to set up the
indicator correctly to enable the printing function.
3. Repeat step 2 to print multiple readings from the
indicator.
4. After printing is done, press the
SEL
button once to
exit the printing mode. The green status light should
now turn off.
5. To roll paper out, press the
LF
(Line Feed) button.
Press
LF
button again to stop line feed.
Call Uline Customer Service at 1-800-295-5510 for any technical questions or issues.
OPERATING ISSUE
RECOMMENDATIONS
The printer is not working.
Ensure the printer is connected to power.
Ensure the thermal paper inside the printer is placed
correctly.
Ensure the cover of the printer is closed completely.
Ensure the indicator is set up to have the print function
activated.
TROUBLESHOOTING
1-800-295-5510
uline.com
