PAGE 2 OF 6
0714 IH-4381
ASSEMBLY CONTINUED
2. Connect remaining crossbars to the same A-frame
by sliding ends over the knobs on the A-frame,
making sure the holes match up. (See Figure 2)
3. Secure each crossbar with a small screw on both
sides.
NOTE: It may be helpful to lay the first A-frame
on the ground and attach all of the crossbars
vertically, in order to more easily attach the
second A-frame.
4. Connect second A-frame to the top crossbar and all
other crossbars using the same methods as steps 1-3.
(See Figure 3)
5. Insert casters into pre-drilled holes on the bottom of
the A-frame. The two casters with brakes should be
placed on the same side of the unit, one on each
A-frame. (See Figure 4)
NOTE: It may be helpful to use a needle nose
pliers to screw the caster stem into the A-frame.
6. Insert the shoe racks by sliding one protruding end
into the slot in the inside of the A-frame, then repeat
with the other end. (See Figure 5)
7. Repeat for all remaining shoe racks.
8. To install the sign holder, place the pointed end into
the center hole on the top crossbar. To change the
direction it faces, remove, rotate 90 degrees and
reinsert the sign. (See Figure 6)
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
