PAGE 2 OF 4
0314 IH-4377
#
DEScRIPTION
QTY.
1
Pump Body
1
2
Rear Cover
1
3
Front Cover
1
4
Rotor
1
5
Vane
2
6
Spring
1
7
Spring Rod
1
8
Lip Seal
1
9
Discharge Spout
1
10
Cap Screw
4
11
Cap Screw
6
12
O-Ring
2
13
Hex Bridge
2
14
Crank Arm
1
15
Set Screw
1
16
Handle
1
17
Handle Shaft
1
18
Hex Nut
1
19
Bung Adapter
1
20
Suction Tube
3
21
Tube Connector
2
22
Suction Filter
1
14
12
11
1
2
5
3
8
7
20
10
15
18
16
17
6
5
19
13
9
22
20
4
21
ASSEMbLY AND INSTALLATION
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
1. Check to see if all parts are included.
2. Screw discharge spout (9) into pump body (1) outlet
using PTFE sealant tape provided.
cAUTION! Do not use pipe sealant.
3. In order to avoid leakage, use PTFE sealant tape
(included) to seal three suction tubes (20) with two
tube connectors (21).
4. Attach bung adapter (19) onto the top of the
assembled suction tube. Screw assembled suction
tube into pump body (1).
5. Insert handle shaft (17) through handle (16). Turn hex
nut (18) onto handle shaft until handle rotates freely.
6. Screw assembled handle to crank arm (14). Keep
handle shaft from turning. Tighten hex nut (18)
against crank arm. Then insert crank arm assembly
onto rotor (4), taking care to align set screw (15) to
indent in rotor shaft.
7. Insert assembled pump into drum and hand tighten
the fixed screw onto bung adapter (19). Be sure to
set pump and assembled suction tube so that the
suction tube is at the desired depth in the drum and
is not blocked.
